Bitcoin-Qt wallet. All about cryptocurrency - BitcoinWiki

Gridcoin 5.0.0.0-Mandatory "Fern" Release

https://github.com/gridcoin-community/Gridcoin-Research/releases/tag/5.0.0.0
Finally! After over ten months of development and testing, "Fern" has arrived! This is a whopper. 240 pull requests merged. Essentially a complete rewrite that was started with the scraper (the "neural net" rewrite) in "Denise" has now been completed. Practically the ENTIRE Gridcoin specific codebase resting on top of the vanilla Bitcoin/Peercoin/Blackcoin vanilla PoS code has been rewritten. This removes the team requirement at last (see below), although there are many other important improvements besides that.
Fern was a monumental undertaking. We had to encode all of the old rules active for the v10 block protocol in new code and ensure that the new code was 100% compatible. This had to be done in such a way as to clear out all of the old spaghetti and ring-fence it with tightly controlled class implementations. We then wrote an entirely new, simplified ruleset for research rewards and reengineered contracts (which includes beacon management, polls, and voting) using properly classed code. The fundamentals of Gridcoin with this release are now on a very sound and maintainable footing, and the developers believe the codebase as updated here will serve as the fundamental basis for Gridcoin's future roadmap.
We have been testing this for MONTHS on testnet in various stages. The v10 (legacy) compatibility code has been running on testnet continuously as it was developed to ensure compatibility with existing nodes. During the last few months, we have done two private testnet forks and then the full public testnet testing for v11 code (the new protocol which is what Fern implements). The developers have also been running non-staking "sentinel" nodes on mainnet with this code to verify that the consensus rules are problem-free for the legacy compatibility code on the broader mainnet. We believe this amount of testing is going to result in a smooth rollout.
Given the amount of changes in Fern, I am presenting TWO changelogs below. One is high level, which summarizes the most significant changes in the protocol. The second changelog is the detailed one in the usual format, and gives you an inkling of the size of this release.

Highlights

Protocol

Note that the protocol changes will not become active until we cross the hard-fork transition height to v11, which has been set at 2053000. Given current average block spacing, this should happen around October 4, about one month from now.
Note that to get all of the beacons in the network on the new protocol, we are requiring ALL beacons to be validated. A two week (14 day) grace period is provided by the code, starting at the time of the transition height, for people currently holding a beacon to validate the beacon and prevent it from expiring. That means that EVERY CRUNCHER must advertise and validate their beacon AFTER the v11 transition (around Oct 4th) and BEFORE October 18th (or more precisely, 14 days from the actual date of the v11 transition). If you do not advertise and validate your beacon by this time, your beacon will expire and you will stop earning research rewards until you advertise and validate a new beacon. This process has been made much easier by a brand new beacon "wizard" that helps manage beacon advertisements and renewals. Once a beacon has been validated and is a v11 protocol beacon, the normal 180 day expiration rules apply. Note, however, that the 180 day expiration on research rewards has been removed with the Fern update. This means that while your beacon might expire after 180 days, your earned research rewards will be retained and can be claimed by advertising a beacon with the same CPID and going through the validation process again. In other words, you do not lose any earned research rewards if you do not stake a block within 180 days and keep your beacon up-to-date.
The transition height is also when the team requirement will be relaxed for the network.

GUI

Besides the beacon wizard, there are a number of improvements to the GUI, including new UI transaction types (and icons) for staking the superblock, sidestake sends, beacon advertisement, voting, poll creation, and transactions with a message. The main screen has been revamped with a better summary section, and better status icons. Several changes under the hood have improved GUI performance. And finally, the diagnostics have been revamped.

Blockchain

The wallet sync speed has been DRASTICALLY improved. A decent machine with a good network connection should be able to sync the entire mainnet blockchain in less than 4 hours. A fast machine with a really fast network connection and a good SSD can do it in about 2.5 hours. One of our goals was to reduce or eliminate the reliance on snapshots for mainnet, and I think we have accomplished that goal with the new sync speed. We have also streamlined the in-memory structures for the blockchain which shaves some memory use.
There are so many goodies here it is hard to summarize them all.
I would like to thank all of the contributors to this release, but especially thank @cyrossignol, whose incredible contributions formed the backbone of this release. I would also like to pay special thanks to @barton2526, @caraka, and @Quezacoatl1, who tirelessly helped during the testing and polishing phase on testnet with testing and repeated builds for all architectures.
The developers are proud to present this release to the community and we believe this represents the starting point for a true renaissance for Gridcoin!

Summary Changelog

Accrual

Changed

Most significantly, nodes calculate research rewards directly from the magnitudes in EACH superblock between stakes instead of using a two- or three- point average based on a CPID's current magnitude and the magnitude for the CPID when it last staked. For those long-timers in the community, this has been referred to as "Superblock Windows," and was first done in proof-of-concept form by @denravonska.

Removed

Beacons

Added

Changed

Removed

Unaltered

As a reminder:

Superblocks

Added

Changed

Removed

Voting

Added

Changed

Removed

Detailed Changelog

[5.0.0.0] 2020-09-03, mandatory, "Fern"

Added

Changed

Removed

Fixed

submitted by jamescowens to gridcoin [link] [comments]

Groestlcoin 6th Anniversary Release

Introduction

Dear Groestlers, it goes without saying that 2020 has been a difficult time for millions of people worldwide. The groestlcoin team would like to take this opportunity to wish everyone our best to everyone coping with the direct and indirect effects of COVID-19. Let it bring out the best in us all and show that collectively, we can conquer anything.
The centralised banks and our national governments are facing unprecedented times with interest rates worldwide dropping to record lows in places. Rest assured that this can only strengthen the fundamentals of all decentralised cryptocurrencies and the vision that was seeded with Satoshi's Bitcoin whitepaper over 10 years ago. Despite everything that has been thrown at us this year, the show must go on and the team will still progress and advance to continue the momentum that we have developed over the past 6 years.
In addition to this, we'd like to remind you all that this is Groestlcoin's 6th Birthday release! In terms of price there have been some crazy highs and lows over the years (with highs of around $2.60 and lows of $0.000077!), but in terms of value– Groestlcoin just keeps getting more valuable! In these uncertain times, one thing remains clear – Groestlcoin will keep going and keep innovating regardless. On with what has been worked on and completed over the past few months.

UPDATED - Groestlcoin Core 2.18.2

This is a major release of Groestlcoin Core with many protocol level improvements and code optimizations, featuring the technical equivalent of Bitcoin v0.18.2 but with Groestlcoin-specific patches. On a general level, most of what is new is a new 'Groestlcoin-wallet' tool which is now distributed alongside Groestlcoin Core's other executables.
NOTE: The 'Account' API has been removed from this version which was typically used in some tip bots. Please ensure you check the release notes from 2.17.2 for details on replacing this functionality.

How to Upgrade?

Windows
If you are running an older version, shut it down. Wait until it has completely shut down (which might take a few minutes for older versions), then run the installer.
OSX
If you are running an older version, shut it down. Wait until it has completely shut down (which might take a few minutes for older versions), run the dmg and drag Groestlcoin Core to Applications.
Ubuntu
http://groestlcoin.org/forum/index.php?topic=441.0

Other Linux

http://groestlcoin.org/forum/index.php?topic=97.0

Download

Download the Windows Installer (64 bit) here
Download the Windows Installer (32 bit) here
Download the Windows binaries (64 bit) here
Download the Windows binaries (32 bit) here
Download the OSX Installer here
Download the OSX binaries here
Download the Linux binaries (64 bit) here
Download the Linux binaries (32 bit) here
Download the ARM Linux binaries (64 bit) here
Download the ARM Linux binaries (32 bit) here

Source

ALL NEW - Groestlcoin Moonshine iOS/Android Wallet

Built with React Native, Moonshine utilizes Electrum-GRS's JSON-RPC methods to interact with the Groestlcoin network.
GRS Moonshine's intended use is as a hot wallet. Meaning, your keys are only as safe as the device you install this wallet on. As with any hot wallet, please ensure that you keep only a small, responsible amount of Groestlcoin on it at any given time.

Features

Download

iOS
Android

Source

ALL NEW! – HODL GRS Android Wallet

HODL GRS connects directly to the Groestlcoin network using SPV mode and doesn't rely on servers that can be hacked or disabled.
HODL GRS utilizes AES hardware encryption, app sandboxing, and the latest security features to protect users from malware, browser security holes, and even physical theft. Private keys are stored only in the secure enclave of the user's phone, inaccessible to anyone other than the user.
Simplicity and ease-of-use is the core design principle of HODL GRS. A simple recovery phrase (which we call a Backup Recovery Key) is all that is needed to restore the user's wallet if they ever lose or replace their device. HODL GRS is deterministic, which means the user's balance and transaction history can be recovered just from the backup recovery key.

Features

Download

Main Release (Main Net)
Testnet Release

Source

ALL NEW! – GroestlcoinSeed Savior

Groestlcoin Seed Savior is a tool for recovering BIP39 seed phrases.
This tool is meant to help users with recovering a slightly incorrect Groestlcoin mnemonic phrase (AKA backup or seed). You can enter an existing BIP39 mnemonic and get derived addresses in various formats.
To find out if one of the suggested addresses is the right one, you can click on the suggested address to check the address' transaction history on a block explorer.

Features

Live Version (Not Recommended)

https://www.groestlcoin.org/recovery/

Download

https://github.com/Groestlcoin/mnemonic-recovery/archive/master.zip

Source

ALL NEW! – Vanity Search Vanity Address Generator

NOTE: NVidia GPU or any CPU only. AMD graphics cards will not work with this address generator.
VanitySearch is a command-line Segwit-capable vanity Groestlcoin address generator. Add unique flair when you tell people to send Groestlcoin. Alternatively, VanitySearch can be used to generate random addresses offline.
If you're tired of the random, cryptic addresses generated by regular groestlcoin clients, then VanitySearch is the right choice for you to create a more personalized address.
VanitySearch is a groestlcoin address prefix finder. If you want to generate safe private keys, use the -s option to enter your passphrase which will be used for generating a base key as for BIP38 standard (VanitySearch.exe -s "My PassPhrase" FXPref). You can also use VanitySearch.exe -ps "My PassPhrase" which will add a crypto secure seed to your passphrase.
VanitySearch may not compute a good grid size for your GPU, so try different values using -g option in order to get the best performances. If you want to use GPUs and CPUs together, you may have best performances by keeping one CPU core for handling GPU(s)/CPU exchanges (use -t option to set the number of CPU threads).

Features

Usage

https://github.com/Groestlcoin/VanitySearch#usage

Download

Source

ALL NEW! – Groestlcoin EasyVanity 2020

Groestlcoin EasyVanity 2020 is a windows app built from the ground-up and makes it easier than ever before to create your very own bespoke bech32 address(es) when whilst not connected to the internet.
If you're tired of the random, cryptic bech32 addresses generated by regular Groestlcoin clients, then Groestlcoin EasyVanity2020 is the right choice for you to create a more personalised bech32 address. This 2020 version uses the new VanitySearch to generate not only legacy addresses (F prefix) but also Bech32 addresses (grs1 prefix).

Features

Download

Source

Remastered! – Groestlcoin WPF Desktop Wallet (v2.19.0.18)

Groestlcoin WPF is an alternative full node client with optional lightweight 'thin-client' mode based on WPF. Windows Presentation Foundation (WPF) is one of Microsoft's latest approaches to a GUI framework, used with the .NET framework. Its main advantages over the original Groestlcoin client include support for exporting blockchain.dat and including a lite wallet mode.
This wallet was previously deprecated but has been brought back to life with modern standards.

Features

Remastered Improvements

Download

Source

ALL NEW! – BIP39 Key Tool

Groestlcoin BIP39 Key Tool is a GUI interface for generating Groestlcoin public and private keys. It is a standalone tool which can be used offline.

Features

Download

Windows
Linux :
 pip3 install -r requirements.txt python3 bip39\_gui.py 

Source

ALL NEW! – Electrum Personal Server

Groestlcoin Electrum Personal Server aims to make using Electrum Groestlcoin wallet more secure and more private. It makes it easy to connect your Electrum-GRS wallet to your own full node.
It is an implementation of the Electrum-grs server protocol which fulfils the specific need of using the Electrum-grs wallet backed by a full node, but without the heavyweight server backend, for a single user. It allows the user to benefit from all Groestlcoin Core's resource-saving features like pruning, blocks only and disabled txindex. All Electrum-GRS's feature-richness like hardware wallet integration, multi-signature wallets, offline signing, seed recovery phrases, coin control and so on can still be used, but connected only to the user's own full node.
Full node wallets are important in Groestlcoin because they are a big part of what makes the system be trust-less. No longer do people have to trust a financial institution like a bank or PayPal, they can run software on their own computers. If Groestlcoin is digital gold, then a full node wallet is your own personal goldsmith who checks for you that received payments are genuine.
Full node wallets are also important for privacy. Using Electrum-GRS under default configuration requires it to send (hashes of) all your Groestlcoin addresses to some server. That server can then easily spy on your transactions. Full node wallets like Groestlcoin Electrum Personal Server would download the entire blockchain and scan it for the user's own addresses, and therefore don't reveal to anyone else which Groestlcoin addresses they are interested in.
Groestlcoin Electrum Personal Server can also broadcast transactions through Tor which improves privacy by resisting traffic analysis for broadcasted transactions which can link the IP address of the user to the transaction. If enabled this would happen transparently whenever the user simply clicks "Send" on a transaction in Electrum-grs wallet.
Note: Currently Groestlcoin Electrum Personal Server can only accept one connection at a time.

Features

Download

Windows
Linux / OSX (Instructions)

Source

UPDATED – Android Wallet 7.38.1 - Main Net + Test Net

The app allows you to send and receive Groestlcoin on your device using QR codes and URI links.
When using this app, please back up your wallet and email them to yourself! This will save your wallet in a password protected file. Then your coins can be retrieved even if you lose your phone.

Changes

Download

Main Net
Main Net (FDroid)
Test Net

Source

UPDATED – Groestlcoin Sentinel 3.5.06 (Android)

Groestlcoin Sentinel is a great solution for anyone who wants the convenience and utility of a hot wallet for receiving payments directly into their cold storage (or hardware wallets).
Sentinel accepts XPUB's, YPUB'S, ZPUB's and individual Groestlcoin address. Once added you will be able to view balances, view transactions, and (in the case of XPUB's, YPUB's and ZPUB's) deterministically generate addresses for that wallet.
Groestlcoin Sentinel is a fork of Groestlcoin Samourai Wallet with all spending and transaction building code removed.

Changes

Download

Source

UPDATED – P2Pool Test Net

Changes

Download

Pre-Hosted Testnet P2Pool is available via http://testp2pool.groestlcoin.org:21330/static/

Source

submitted by Yokomoko_Saleen to groestlcoin [link] [comments]

#Reddcoin ($RDD) Core Wallet Release 3.0.1 - PosV v2 SuperMajority Consensus Upgrade at 45.6% - Required Upgrade

Reddcoin (RDD) Core Wallet v3.0.1 - January 09, 2020
Version 3.0.1 is the official release version of Reddcoin Core. It is available for download at Reddcoin Core's Github repository here: https://github.com/reddcoin-project/reddcoin/releases/tag/v3.0.1
This release features PoSV v2.supermajority activation and new staking ruleset (and minor misc fixes). v3.0.1 is still not yet MacOS Catalina compatible. We are still working and should have that fix issued very soon. Sincere apologies to our Mac-using ReddHeads.
It is particularly important that all users upgrade, as once PoSV v2 is enforced, version 4 blocks will be rejected from the network entirely.
Therefore v3.0.1 is a "strongly recommended" update for all users. Note: If you have already installed v3.0.0, this upgrade is not required. If you have not yet upgraded from v2.0.x or earlier, this is a REQUIRED upgrade. Please install the newest version v3.0.1 to avoid losing functionality during supermajority activation of PoSV v2.
Reddcoin Core version 3.0.1 is now available from: https://github.com/reddcoin-project/reddcoin/releases Release Notes are available here and replicated below in this announcement: https://github.com/reddcoin-project/reddcoin/blob/mastedoc/release-notes.md
This is a new major version release of Reddcoin.
Previously, the original and subsequent versions of Reddcoin were taken from a fork of the Litecoin code base.
With the release of Reddcoin V2.0.0, the code was based directly from a fork of Bitcoin. This allows for better source control and feature implementation from upstream changes into the future
With the release of Reddcoin V3.0.0, the PoSV stake reward has been improved to allow for a target 5% network growth, in process re-incentivizing individual network stakers and providing for integrated dev support.
Upgrading to this release is strongly recommended and required for continued operation. Once a supermajority of 90% is reached, old wallets will no longer accept the new v5 blocks.
Please report bugs using the issue tracker at github:
https://github.com/reddcoin-project/reddcoin/issues
How to Upgrade
If you are running an older version of Reddcoin, shut it down. Wait until it has completely shut down (which may take a few minutes for older versions). Run the installer (on Windows) or just copy over /Applications/Reddcoin-Qt (on Mac) or reddcoind/reddcoin-qt (on Linux).
Start wallet. All done!
Reddcoin v3.0.0 introduced an updated PoSV method to better distribute staking rewards and target a overall 5% network growth. Staking and relay policy enhancements 
To implement PoSV v2, Reddcoin Core's block templates are now for version 5 blocks only. When PoSV v2 consensus (Supermajority 9000/10000) is reached, only v5 blocks will be accepted by the network.This equates to approximately 90% of blocks being generated over 1 week period. Status at any time may be viewed in node debug.log
Blockchain Download:
Blockchain data for both testnet and mainnet along with instructions can be downloaded from github. https://github.com/reddcoin-project/bootstrap_files
3.0.1 changelog
*83e212838 - John Nash, 2020-01-09 : really delete these files *3a1458ecd - Oliver Webb, 2020-01-08 : Added missing dependency libminiupnpc-dev for Jessie *d21915431 - Tiago Peralta, 2019-06-21 : Add vout to listtransactions/gettransaction *8d58ea7cf - Oliver Webb, 2020-01-08 : Script for downloading pre compiled binaries for Raspbian Jessie, Stretch or Buster *d4eced1bc - Oliver Webb, 2020-01-08 : Delete reddcoin_core_download_raspbian_stretch.sh *c5e9f91cf - Oliver Webb, 2020-01-08 : Delete reddcoin_core_download_raspbian_jessie.sh *5d5771b00 - Oliver Webb, 2020-01-08 : Delete reddcoin_core_download_raspbian_buster.sh *75c6ae91b - Oliver Webb, 2020-01-05 : add reddcoin-qt and remove starting daemon process *54c501787 - Oliver Webb, 2020-01-05 : add reddcoin-qt and remove starting daemon process *acb30a2b6 - Oliver Webb, 2020-01-05 : script files for Raspbian Jessie (also Stakebox) *cfddbe594 - John Nash, 2020-01-05 : Update copyright year and version *e46e5e7de - John Nash, 2020-01-05 : download script for pre compiled wallet *37386790a - John Nash, 2020-01-05 : change libssl deb packages links to github *9dbc772e6 - Oliver Webb, 2020-01-03 : download script for pre compiled wallet *857d697fd - Oliver Webb, 2020-01-03 : change libssl deb packages links to github *2cb74b9a8 - John Nash, 2019-12-31 : update copyright year *c641a1ab3 - Oliver Webb, 2019-12-30 : Raspberry Pi build script files for v3 wallet *a3f21a4a4 - John Nash, 2019-12-30 : add install script for building db4 update instructions for unix, osx, arm building using the db4 install script *5f6299b2a - John Nash, 2019-12-28 : docs: Update build notes for arm processors *465716c01 - John Nash, 2019-12-28 : test for arm devices *3fec3a535 - John Nash, 2018-02-02 : build: update source paths *5f6031ab4 - John Nash, 2019-12-28 : Scrypt n=1024 Pow hash based upon Colin Percival's Tarnsnap (2009) Modified by Artforz, coblee, pooler, wtogami, Nikolay Belikov, reddink *2fd4d91a0 - John Nash, 2019-12-24 : update copyright year *326828b36 - John Nash, 2019-12-24 : set release state true *8ebede0a6 - John Nash, 2019-12-24 : release notes *36df6fdfb - John Nash, 2019-12-23 : add check explictly for v5 blocks or greater *874dc1f0c - John Nash, 2019-12-17 : remove hardcoded global variable rearrange debug log output *763b25db8 - John Nash, 2019-12-17 : move copyright to new line *536baf635 - John Nash, 2019-12-17 : update version and set release state to false *cde9009f3 - John Nash, 2019-12-17 : update copyright year *ae41b7ed3 - John Nash, 2019-12-17 : set isSuperMajority to 90% for mainnet *e43e1c8ed - John Nash, 2019-12-10 : additional logging to verify isSuperMajority in the debug.log output *e31783cac - John Nash, 2019-12-05 : add/update public key for mainnet *405c6f002 - John Nash, 2019-12-05 : add log output for current inflation rate *9cc43c3f7 - John Nash, 2019-12-02 : determine calculated stake based on posv version *7baa3bf75 - John Nash, 2019-11-25 : check the posv transaction for correct pubkey *9ffa7ca38 - John Nash, 2019-11-21 : check for posv v1 or posv v2 blocks when calculating stake reward *39f7aad68 - John Nash, 2019-11-14 : add logging *0e283e6c3 - John Nash, 2019-11-13 : correct maths *74cbdeffd - John Nash, 2019-11-11 : use new posv v2 functions addidtional logging *35d7413b5 - John Nash, 2019-11-11 : add new proofofstakereward *3d917216c - John Nash, 2019-11-11 : get inflation adjustment *f63d17443 - John Nash, 2019-11-08 : add the developer output split fund output *ca263c9c9 - John Nash, 2019-11-05 : add dev key to chainparams *df6996ab0 - John Nash, 2019-11-05 : add block version checking *14b663479 - John Nash, 2019-11-05 : increase block version
Credits
Thanks to everyone who contributed to coding, testing and feedback for this release, notably:
@cryptognasher @techadept @chris @cryptobuze @harmonyq @mindredder @paxtech @Tiago Peralta 
Stake on!!
-Reddcoin (RDD) Core Development Team
submitted by TechAdept to reddCoin [link] [comments]

Help out a kind of newbie

Hi guys, So Im having a bit of a problem with my bitcoin wallet. See, I got into bitcoin about 2 years ago, back when bitcoins were worth very little real money, if any at all, but I managed to get quite a few. I recently found out they were getting bigger, so I tried to open bitcoin with my wallet, but it crashed, so I moved it from my mac to my PC. It said it was something like 200* weeks behind, so I waited, and now when its finally done, it says I have no bitcoins, but Im sure this wallet had some. Any ideas of how to get them back?
submitted by ostrich160 to Bitcoin [link] [comments]

Update Your Wallet Bitcore Core 0.15.2.0Update Your Wallet Bitcore Core 0.15.2.0

Update Your Wallet Bitcore Core 0.15.2.0Update Your Wallet Bitcore Core 0.15.2.0
Artwork by Design Team - Bitcore BTX ® 2018
Dear Bitcore BTX community. Bitcore Core Wallet version 0.15.2.0 has now been released which includes a very important security fix for a DoS vulnerability, CVE-2018-17144! It is important to keep our wallets updated, because this will give you a better security of your BTX.

The updates well to improve the programming codes and make more efficient the ecosystem, so we ask you to make these updates.

Here we leave the links to the different wallets that we have at your disposal, please choose the one that best suits your needs and requirements and do not forget to follow the security steps to safeguard the integrity of your BTX.
The release is available now at: Bitcore BTX Core 0.15.2.0
Wallets: WIN | WIN+BLOCK (861MB) | LINUX | MAC
https://preview.redd.it/e4mwn9l01go11.png?width=1440&format=png&auto=webp&s=760f1dcc5ced59a6c4f246342d3d8108f0caca11
Web: Official | News | Coin Specs | Roadmap | White Paper | Ecosystem | Network Update | Community | FAQ | Blog | Team Wallets: Windows | Win Wallet & Blockchain | Linux | Mac | iOS | Android | Eletrum | Zeltrez | Jaxx Liberty Exchanges: Bit Z | Cryptopia | hitBTC | VE Bitcoin | Exrates | Crypto Bridge | QBTC | Coinexchange | Octaex | Bitexlive | Bitibu | Trade Satoshi | PayCML | Excoincial Services: Livingroom of Satoshi | Kamoney | Cryptonaut | EasyRabBit.net | LuckyGames.io | InstaSwap Block Explorers: InsightAPI | Crypto ID | Liivenet Mining Pools: Bitcorepool | Yiimp | Suprnova | Chainworks | Umine | Ant Mine Pool | Coin Miners | BSOD | BTXpool | Minersport | Omegapool | PoolGPU Market Info: CoinMarketCap | World Coin Index | Cryptocompare Source: Github | Kryptowerk | DgCarlosLeon
submitted by dgcarlosleon to bitcore_btx [link] [comments]

Thank you for running your own full Vertcoin node and supporting VTC network! We currently have 518 Full Nodes running.

Thank you for running your own full Vertcoin node and supporting VTC network! We currently have 518 Full Nodes running.
Official node scanner list: https://scanner.vertcoin.org/nodes
Since every full VTC node can only serve so many clients, it's important to do your part for the Vertcoin network and run your own full node.
Q: WHAT IS A FULL NODE? A: Full nodes maintain a copy of the blockchain/ledger, distribute it to those downloading it, confirm transactions, and further spread out all of the previous functions to make the network more resilient. https://bitcoin.org/en/full-node
Q: Do I need to be a miner? A: No, you don't need to be a miner. Miners create new blocks. Full nodes simply share existing blocks (the entire VTC blockchain) with the rest of VTC wallet users.
Q: How do I run a Full VTC node on Intel NUC? A: Intel NUC Vertcoin full node installation done using Windows guide: https://github.com/vertcoin-project/VertDocs/blob/mastedocs/FullNodes/intel-nuc.md
Q: How do I run a Full VTC node? A: It's actually quite easy to do. If you run Vertcoin-QT (Vertcoin Core Wallet) on your PC/MAC desktop, keep it active in the systray. Then, make sure that you map the public port 5889 of your router to the port 5889 on the machine running Vertcoin-QT or vertcoind. For people running a public p2pool node this should be a no-brainer: you already have a synchronized vertcoind. So if you haven't opened port 5889 do it now - it's all you have to do. Your node is then public and can serve blocks and relay transactions.This makes our network much stronger and will help it to perform better. Any old or low power computer is good enough to run a full VTC node. If you have a Raspberry Pi or any old PC lying around, install vertcoind and run it in the background.
Q: How do I know if my Full Node is working correctly? A: To be a full node, you have to check to make sure you are accepting incoming connections. To do that, go under Help -> Debug Window. In the first tab, "Information", there is a Network "Number of Connections" which will show both incoming and outgoing connections. If the "In" is 0, then you are not a full node. If the "In" is greater than 0, you are acting as a full node and supporting VTC blockchain! Thank you!
What is Vertcoin? | Lightning Network SEGWIT Enabled ASIC resistant money https://www.youtube.com/watch?v=86-oMyHDCNc
Linux instructions: https://www.cryptocurrencyfreak.com/2017/09/06/setup-vertcoin-full-node-ubuntu-16-04/
submitted by blockchaintechnology to vertcoin [link] [comments]

Thank you for running your own VTC node and supporting VTC network! We now have 1394 Full Nodes, more than Litecoin

You guys are amazing! :) Thank you for running your own full VTC node and supporting VTC network! We now have 1394 Full Nodes :)
Official node scanner list: https://scanner.vertcoin.org/nodes
Since every full VTC node can only serve so many clients, it's important to do your part for the Vertcoin network and run your own full node.
Q: WHAT IS A FULL NODE? A: Full nodes maintain a copy of the blockchain/ledger, distribute it to those downloading it, confirm transactions, and further spread out all of the previous functions to make the network more resilient. https://bitcoin.org/en/full-node
Q: Do I need to be a miner? A: No, you don't need to be a miner. Miners create new blocks. Full nodes simply share existing blocks (the entire VTC blockchain) with the rest of VTC wallet users.
Q: How do I run a Full VTC node? A: It's actually quite easy to do. If you run Vertcoin-QT (Vertcoin Core Wallet) on your PC/MAC desktop, keep it active in the systray. If you have a Raspberry Pi or any old PC lying around, install vertcoind and run it in the background. Then, make sure that you map the public port 5889 of your router to the port 5889 on the machine running Vertcoin-QT or vertcoind. For people running a public p2pool node this should be a no-brainer: you already have a synchronized vertcoind. So if you haven't opened port 5889 do it now - it's all you have to do. Your node is then public and can serve blocks and relay transactions.This makes our network much stronger and will help it to perform better.
Q: How do I know if my Full Node is working correctly? A: To be a full node, you have to check to make sure you are accepting incoming connections. To do that, go under Help -> Debug Window. In the first tab, "Information", there is a Network "Number of Connections" which will show both incoming and outgoing connections. If the "In" is 0, then you are not a full node. If the "In" is greater than 0, you are acting as a full node and supporting VTC blockchain! Thank you!
Why Vertcoin? Learn about why ASIC Resistance matters! https://www.youtube.com/watch?v=UHXqfZWjuHI
Linux instructions: https://www.cryptocurrencyfreak.com/2017/09/06/setup-vertcoin-full-node-ubuntu-16-04/
submitted by blockchaintechnology to vertcoin [link] [comments]

Bitcore whitepaper launch countdown

Bitcore whitepaper launch countdown
Today we are especially proud to inform you that less than 23 hours we will be publishing our WhitePaper v1.0 to the world.
Artwork by Design Team - Bitcore BTX ® 2018
It's already a reality, Bitcore will have its WhitePaper ready where you can find the complete alphabet of our project today.
A team effort, done with passion to Bitcore and our entire community.
we invite you to follow the countdown to the publication of this important document, here is the link.
. Bitcore whitepaper launch countdown
. Bitcore whitepaper launch countdown
. Bitcore whitepaper launch countdown
https://preview.redd.it/fpi4fnmxwya11.jpg?width=1423&format=pjpg&auto=webp&s=208341b1990629408edd493a5026cf9f9c891717
https://preview.redd.it/wu5uwnfzwya11.jpg?width=1440&format=pjpg&auto=webp&s=21521f6feb35cef142e9262aae58f54d9de50bb4
Web: Official | News | Coin Specs | Roadmap | Ecosystem | Network Update | Community | FAQ | Blog | Team Wallets: Windows | Win Wallet & Blockchain | Linux | Mac | iOS | Android | Eletrum | Zeltrez Exchanges: Bit Z | Cryptopia | hitBTC | VE Bitcoin | Exrates | Crypto Bridge | QBTC | Coinexchange | Octaex | Bitexlive | Bitibu | Trade Satoshi | PayCML Services: Livingroom of Satoshi | Kamoney | Cryptonaut | EasyRabBit.net | LuckyGames.io Block Explorers: InsightAPI | Crypto ID | Liivenet Mining Pools: Bitcorepool | Yiimp | Suprnova | Chainworks | Umine | Ant Mine Pool | Coin Miners | BSOD | BTXpool | Minersport | Omegapool | PoolGPU Market Info: CoinMarketCap | World Coin Index | Cryptocompare Source: Github | Kryptowerk | DgCarlosLeon
submitted by dgcarlosleon to bitcore_btx [link] [comments]

Thank you for running your own full Vertcoin node and supporting VTC network! We currently have 811 Full Nodes running.

Thank you for running your own full Vertcoin node and supporting VTC network! We currently have 811 Full Nodes running.
Official node scanner list: https://scanner.vertcoin.org/nodes
Since every full VTC node can only serve so many clients, it's important to do your part for the Vertcoin network and run your own full node.
Q: WHAT IS A FULL NODE? A: Full nodes maintain a copy of the blockchain/ledger, distribute it to those downloading it, confirm transactions, and further spread out all of the previous functions to make the network more resilient. https://bitcoin.org/en/full-node
Q: Do I need to be a miner? A: No, you don't need to be a miner. Miners create new blocks. Full nodes simply share existing blocks (the entire VTC blockchain) with the rest of VTC wallet users.
Q: How do I run a Full VTC node? A: It's actually quite easy to do. If you run Vertcoin-QT (Vertcoin Core Wallet) on your PC/MAC desktop, keep it active in the systray. Then, make sure that you map the public port 5889 of your router to the port 5889 on the machine running Vertcoin-QT or vertcoind. For people running a public p2pool node this should be a no-brainer: you already have a synchronized vertcoind. So if you haven't opened port 5889 do it now - it's all you have to do. Your node is then public and can serve blocks and relay transactions.This makes our network much stronger and will help it to perform better. Any old or low power computer is good enough to run a full VTC node. If you have a Raspberry Pi or any old PC lying around, install vertcoind and run it in the background.
Q: How do I know if my Full Node is working correctly? A: To be a full node, you have to check to make sure you are accepting incoming connections. To do that, go under Help -> Debug Window. In the first tab, "Information", there is a Network "Number of Connections" which will show both incoming and outgoing connections. If the "In" is 0, then you are not a full node. If the "In" is greater than 0, you are acting as a full node and supporting VTC blockchain! Thank you!
Why Vertcoin? Learn about why ASIC Resistance matters! https://www.youtube.com/watch?v=UHXqfZWjuHI
Linux instructions: https://www.cryptocurrencyfreak.com/2017/09/06/setup-vertcoin-full-node-ubuntu-16-04/
submitted by blockchaintechnology to vertcoin [link] [comments]

Thank you for running your own full Vertcoin node and supporting VTC network! We currently have 518 Full Nodes running.

Thank you for running your own full Vertcoin node and supporting VTC network! We currently have 518 Full Nodes running.
Since every full VTC node can only serve so many clients, it's important to do your part for the Vertcoin network and run your own full node.
Q: WHAT IS A FULL NODE? A: Full nodes maintain a copy of the blockchain/ledger, distribute it to those downloading it, confirm transactions, and further spread out all of the previous functions to make the network more resilient. https://bitcoin.org/en/full-node
Q: Do I need to be a miner? A: No, you don't need to be a miner. Miners create new blocks. Full nodes simply share existing blocks (the entire VTC blockchain) with the rest of VTC wallet users.
Q: How do I run a Full VTC node on Intel NUC? A: Intel NUC Vertcoin full node installation done using Windows guide: https://github.com/vertcoin-project/VertDocs/blob/mastedocs/FullNodes/intel-nuc.md
Q: How do I run a Full VTC node? A: It's actually quite easy to do. If you run Vertcoin-QT (Vertcoin Core Wallet) on your PC/MAC desktop, keep it active in the systray. Then, make sure that you map the public port 5889 of your router to the port 5889 on the machine running Vertcoin-QT or vertcoind. For people running a public p2pool node this should be a no-brainer: you already have a synchronized vertcoind. So if you haven't opened port 5889 do it now - it's all you have to do. Your node is then public and can serve blocks and relay transactions.This makes our network much stronger and will help it to perform better. Any old or low power computer is good enough to run a full VTC node. If you have a Raspberry Pi or any old PC lying around, install vertcoind and run it in the background.
Q: How do I know if my Full Node is working correctly? A: To be a full node, you have to check to make sure you are accepting incoming connections. To do that, go under Help -> Debug Window. In the first tab, "Information", there is a Network "Number of Connections" which will show both incoming and outgoing connections. If the "In" is 0, then you are not a full node. If the "In" is greater than 0, you are acting as a full node and supporting VTC blockchain! Thank you!
Q: Vertnode - An automated solution for installing Vertcoin node(s) on Single Board Computers A: https://www.reddit.com/vertcoin/comments/901e6a/vertnode_an_automated_solution_for_installing/
What is Vertcoin? | Lightning Network SEGWIT Enabled ASIC resistant money https://www.youtube.com/watch?v=86-oMyHDCNc
Official node scanner list (NOT RELIABLE, current node count could be much much higher. If you are a developer, please help us make a better Node Scanner): https://scanner.vertcoin.org/nodes
Linux instructions: https://www.cryptocurrencyfreak.com/2017/09/06/setup-vertcoin-full-node-ubuntu-16-04/
submitted by blockchaintechnology to vertcoin [link] [comments]

Bitcore: Recent News 14/07/2018

Bitcore: Recent News 14/07/2018
Here is a short list of important recent events and news regarding the Bitcore project:
Artwork by Design Team - Bitcore BTX ® 2018
1. New public key format for Bitcore (BTX). This is an update of major importance. Read all about it here: https://bitcointalk.org/index.php?topic=1883902.msg41275053#msg41275053
2. Bitcore now available for Linux distributions via docker image: https://bitcointalk.org/index.php?topic=1883902.msg40939886#msg40939886
3. Electrum wallet now released for Bitcore: https://bitcointalk.org/index.php?topic=1883902.msg41574645#msg41574645
4. New Core wallet 0.15.1.0 released with full support for the new public key format: https://bitcointalk.org/index.php?topic=1883902.msg41485682#msg41485682
5. Completely updated Bitcointalk.org announcement page for Bitcore: https://bitcointalk.org/index.php?topic=1883902.0
6. Zeltrez, a completely new multi-wallet, now also supporting Bitcore: https://zeltrez.io/downloads/
https://preview.redd.it/4vikmu9f38a11.jpg?width=1423&format=pjpg&auto=webp&s=5dd1ff692639e88d0400520ff93f5f0737195d5e
https://preview.redd.it/5o6geotd38a11.jpg?width=1440&format=pjpg&auto=webp&s=e26c95ac33283ceaf4eb0b7c89f10626c7b67e4a
Web: Official | News | Coin Specs | Roadmap | Ecosystem | Network Update | Community | FAQ | Blog | Team Wallets: Windows | Win Wallet & Blockchain | Linux | Mac | iOS | Android | Eletrum | Zeltrez Exchanges: Bit Z | Cryptopia | hitBTC | VE Bitcoin | Exrates | Crypto Bridge | QBTC | Coinexchange | Octaex | Bitexlive | Bitibu | Trade Satoshi | PayCML Services: Livingroom of Satoshi | Kamoney | Cryptonaut | EasyRabBit.net | LuckyGames.io Block Explorers: InsightAPI | Crypto ID | Liivenet Mining Pools: Bitcorepool | Yiimp | Suprnova | Chainworks | Umine | Ant Mine Pool | Coin Miners | BSOD | BTXpool | Minersport | Omegapool | PoolGPU Market Info: CoinMarketCap | World Coin Index | Cryptocompare Source: Github
submitted by dgcarlosleon to bitcore_btx [link] [comments]

[PSA] Dogecoin Wallet version 1.4 released. You must update.

WARNING: DO NOT send your wallet.dat file or dogecoin folder to anyone. There have been reports of people offering to help others by asking them to send their files to them so they can help. DO NOT do this. Scam attempt picture
Always encrypt your wallet! I can't express this enough. You should use a strong password longer than 15 characters. This password should contain numbers, symbols, and some capitalization! There is no need to have your wallet open 24 hours a day. Open it only when you need it. See - 'Getting Started' on the side bar.
This entire post has been written to be as close to ELI5 (Explain it like I'm 5) as possible - By request! If anyone wants to add/fix/correct anything in this message, please send a message to the mods <<-- Click blue text.
All blue text in this post can be clicked on. The blue text is a link to a picture, site or download file.
A very important message/reminder below.
25 Jan 1.5 pre-releases have started.
http://www.reddit.com/dogecoin/comments/1uhpwf/dogecoin_for_mac_14_topic_thread/
OLD VERSIONS The 1.4 update for the dogecoin wallet has been released. This update addresses the block chain error that occurred. This update is mandatory meaning you have to do this update. Also further down the page you can read up about the block chain. You MUST make sure you're on the correct block chain and the old block chain has been removed.
For a Windows computer the version must be 1.4. - 1.4.1 just released! See below
For a Apple Mac Computer the version must be 1.4
Download links:
[Windows Download Link](https://github.com/dogecoin/dogecoin/releases/download/1.4/dogecoin-qt-v14-Win.zip) <<--Click to start download
Windows Download Link 1.4.1 UPDATED 19JAN
Mac Download Link <<--Click to start download
Mac users can join this thread if there are any problems
Android (phone): Please see This post
To update, simply download the new version from the download link above. Open the downloaded file and extract the contents of the downloaded file into any new folder or location on your computer. If you put the files into a folder you can name the folder anything you want but make sure you remember that this is the latest version of the software.
You don't have to remove your folder containing the old version of the wallet. You can place it in a folder called 'Old versions of dogecoin wallet' if you like.
Now you can click on the Dogecoin icon contained in the new folder to open your version 1.4 wallet.
What happens if I get an error when I open the new wallet?
An error was reported called "11DbException"
If this happens Download this file and place it in the same folder as your updated wallet. Open the file you just downloaded called "Dogecoin OPEN' and wait. This might take 2 or 3 minutes.
Also jtlarousse has found a solution that worked on Windows. Please follow carefully and make backups before starting.
Reebzy might have found a solution for Apple Mac
Blockchain fork 101: The block chain is a ledger or document created containing every transaction that has ever happened. This file can be quite large. Bitcoins ledger is over 15GB. At some point this document/ledger split into two separate documents known as a fork.
How do I know if I am on the right block chain?
Go to your newly updated dogecoin wallet and open it. Click on Help>>Debug next Observe the current block number
*Note the example numbers in the pictures might be out of date by the time you read them
Now go over to http://dogechain.info/chain/Dogecoin . This website is the official Dogecoin blockchain website. Check the block number they're reporting
The number you found in your wallet and the number reported on the website should close. There might be a difference of 100 blocks depending on when you last refreshed your wallet or how long it took for you to get from one step to the next step in this guide and if the dogechain website is lagging.
I'M NOT ON THE CORRECT BLOCK CHAIN
My numbers are very different. How do I get back onto the right block chain?
IMPORTANT
For windows:
1)Close down the Dogecoin wallet client.
2)Go to your data folder: C:\Users[your windows log-in name]\AppData\Roaming\DogeCoin
3)Delete the Dogecoin.conf file. Do not delete the wallet.dat file!
4)Download this update file and place it into the Dogecoin folder where the other file was deleted.
For Apple Mac:
1)Close down the Dogecoin wallet client.
2)Go to your data folder: ~/Libarary/Application Support/Dogecoin
3)Delete the Dogecoin.conf file. Do not delete the wallet.dat file!
4)Download this update file and place it into the Dogecoin folder where the other file was deleted.
Next visit this post by Netcodepool for instructions on how to manually download the correct block chain and install it.
Much Thanks. 
Edit: Some posts were removed from this thread. To limit confusion.
Check this post for details about mining pools that were/are using the wrong fork.
Did you send coins only to find out you're on the wrong chain? See this post to get them back
An Apple Mac support thread has been made by voidref (The mac developer). If you're having troubles please see this thread
Some shibes have reported their wallets wont sync. Please check to make sure your firewall, antivirus, malware scanner or similar programs are not blocking it the wallet. You can add rules to these programs to allow the wallet to make contact with the internet. It's not advised but possible to also disable the software for a short amount of time. Don't forget to enable the software again afterwards.
Is your wallet crashing? Try this helpful tip from gandhikahn or if you're using windows try the 1.4.1 update above.
submitted by 42points to dogecoin [link] [comments]

Thank you for running your own full Vertcoin node and supporting VTC network! We currently have 867 Full Nodes running.

Thank you for running your own full Vertcoin node and supporting VTC network! We currently have 867 Full Nodes running.
Official node scanner list: https://scanner.vertcoin.org/nodes
Since every full VTC node can only serve so many clients, it's important to do your part for the Vertcoin network and run your own full node.
Q: WHAT IS A FULL NODE? A: Full nodes maintain a copy of the blockchain/ledger, distribute it to those downloading it, confirm transactions, and further spread out all of the previous functions to make the network more resilient. https://bitcoin.org/en/full-node
Q: Do I need to be a miner? A: No, you don't need to be a miner. Miners create new blocks. Full nodes simply share existing blocks (the entire VTC blockchain) with the rest of VTC wallet users.
Q: How do I run a Full VTC node? A: It's actually quite easy to do. If you run Vertcoin-QT (Vertcoin Core Wallet) on your PC/MAC desktop, keep it active in the systray. Then, make sure that you map the public port 5889 of your router to the port 5889 on the machine running Vertcoin-QT or vertcoind. For people running a public p2pool node this should be a no-brainer: you already have a synchronized vertcoind. So if you haven't opened port 5889 do it now - it's all you have to do. Your node is then public and can serve blocks and relay transactions.This makes our network much stronger and will help it to perform better. Any old or low power computer is good enough to run a full VTC node. If you have a Raspberry Pi or any old PC lying around, install vertcoind and run it in the background.
Q: How do I know if my Full Node is working correctly? A: To be a full node, you have to check to make sure you are accepting incoming connections. To do that, go under Help -> Debug Window. In the first tab, "Information", there is a Network "Number of Connections" which will show both incoming and outgoing connections. If the "In" is 0, then you are not a full node. If the "In" is greater than 0, you are acting as a full node and supporting VTC blockchain! Thank you!
What is Vertcoin? | Lightning Network SEGWIT Enabled ASIC resistant money https://www.youtube.com/watch?v=86-oMyHDCNc
Linux instructions: https://www.cryptocurrencyfreak.com/2017/09/06/setup-vertcoin-full-node-ubuntu-16-04/
submitted by blockchaintechnology to vertcoin [link] [comments]

Groestlcoin Release September 2018

Introduction

As always, the past 3 months since 22nd June have been crazy busy. The bears might still be around, but the show must go on and of course has not slowed the Groestlcoin development team in the slightest. Here’s a quick overview of what has already happened since the last release: - Integrated into the bitbns exchange, with the ability to buy Groestlcoin directly with the Indian Rupee. - Groestlcoin Rebrand Vote – Whilst there was much talk and push for a rebrand vote, the overall result was almost unanimously in favour of keeping our unique and conversation-starting name. With just 83 votes to Rebrand, and 2577 votes to No Rebrand. Thank you for all who voted, the funds raised are being used to fund ongoing hosting and development costs. - Integrated into the Cryptobridge exchange. Cryptobridge is a popular decentralised exchange where you always hold the private keys to your funds, only YOU have access to them. - Groestlcoin has been added to SimpleSwap – Groestlcoin can now be swapped with over 100 other cryptocurrencies, without signing up! - Groestlcoin has been added to UnoDax, one of the leading cryptocurrency exchanges in India, with TUSD, BTC and INR trading pairs. - Groestlcoin has been added to SwapLab.cc, where you can buy Groestlcoin using Bitcoin and over 50 other altcoins. Purchasing with VISA/Mastercard is coming VERY SOON. Discussed later: - Groestlcoin has been listed on #3 largest exchange in the world on volume, Huobi Global! More on this to come further on in the announcements. - Groestlcoin has been added to the Guarda Multi-Currency Wallet. - Groestlcoin has been added to Melis Multi-Device, Multi-Account, Multi-Platform, Multi-Signature advanced wallet! Already this list is far more than most other cryptocurrencies have achieved in the past 3 months. But this is just the tip of the iceberg of what has been developed.

What's been Happening?

GRSPay Released

We are so excited for this, that it has it's own separate reddit thread. Head over there now at https://www.reddit.com/groestlcoin/comments/9ikr5m/groestlcoin_releases_grspay/? to see more on this!
https://www.melis.io/assets/logo-navbar-4b6f0d372f15b2446d3fa4c68f346e4fb08ee113941186cee58fd6135f3f8b7d.svg

Melis Wallet

The the most advanced wallet for Bitcoin, Bitcoin Cash, Litecoin and now Groestlcoin.
With Melis you have the complete control of your bitcoins and private keys, you can define spending limits policies and make use of two or more factors authentication. Melis is open source, published on GitHub.

How Melis Works?

You can create as many accounts as you want. An account is a part of your wallet that can be customised to your requirements. You can choose how many co-signers are required to spend funds. The accounts are completely independent and act like separate wallets from each other but can be accessed via the same details. A core feature of Melis is the ability to set a ‘primary’ device. With this you can set an account as ‘Secure’ so it is only viewable (and accessible at all) from the Primary device. You can have a savings account hidden from the outside world whilst also having your ‘spending’ funds available on the go. With Melis you can create a multi-signature account between N people, where up to N signatures are required to sign a transaction, choosing if any of those should be mandatory.
Core Features:
https://guarda.co/assets/images/1PGo4ID.svg?1537791124643

Guarda Wallet

Safer than ever! Desktop Light Wallet - Anonymous and fast!
With Guarda Multi-currency Desktop Light Wallet you don’t need to register. Guarda has no access to your private keys or funds. You can receive, send, store, buy and exchange cryptocurrencies in complete anonymity and safety. All these features are available on Linux, Windows or MacOS. Choose the one that suits you!
More info about Guarda wallet on www.guarda.co
https://holytransaction.com/images/logo.png

Integrated into HolyTransaction

What is HolyTransaction?

HolyTransaction gives users access to the crypto world with a universal cryptocurrency wallet and instant exchange.

Features

For more information, visit Holy Transaction here.
https://www.groestlcoin.org/wp-content/uploads/2018/09/next-grs-groestlcoin.jpg

Integrated into NEXT Wallet

What is NEXT?

NEXT is a modern, next-generation stylish open-source Desktop wallet.

Features

For more information, visit NextWallet here.
https://blockchainfinancial.com/mediaserve2018/09/admin-06143647-bcf_logo_vec_256x256.png

Integrated into Blockchain Financial

What is Blockchain Financial?

Blockchain Financial is a set of web based services for individuals and companies that want to make things happen with the Cryptocurrencies Ecosystem. - For those that don't know anything about cryptocurrencies, we offer tools that will let them receive, send and operate with an assortment of coins. - For those that are already riding the wave, we offer tools that will let them do all those things that they weren't able to do.

Blockchain Financials mission

We're not here to reinvent the wheel. We're here to make it run smoother for you, and we provide some of the most useful services you'll find on the internet, made in a way that is easy to understand and use on a daily basis. In short, we're a bunch of people that claim to be Crypto Evangelists. We strongly believe in cryptocurrencies, and our main promise is to push them up so more people get involved and take all the advantages they offer.

More information from Blockchain Financial

Back in 2014, the world was taken by storm when Facebook approved the first cryptocurrencies tipping apps. The first was for Dogecoin, and the second was for multiple coins.
The project was hosted on whitepuma.net, and persisted for almost two years, built up a massive user community and gave a home to Bitcoin, Litecoin, Dogecoin and dozens of other bitcoin-based altcoins.
After very active months, the tipping hype started to fade away. Then, the developers decided to jump into the next stage: bringing not only tipping, but also mining and a widget that could be embedded on websites to allow everyone to accept payments. Sadly, the work was never completed because the project started to require an unsustainable amount of resources. Then, in a painful decision, a shutdown was announced by December 2015.
A couple of months after whitepuma.net was closed, the source code was released by its creator as Open Source on GitHub. But it wasn't maintained.
Now, some of the original members of the dev and admin teams gathered up with a handful of the WhitePuma's elite users, and decided to make something good with the best pieces of the old source code. That, with fresh new ideas and the power of the BardCanvas engine, synthesized the core of Blockchain Financial.
More info about Blockchain Financial wallet on .
For more information, visit [Blockchain Financial](www.blockchainfinancial.com)
https://www.huobi.com/image/logo.aeb4723.svg

Groestlcoin Listed on Huobi

Who are Huobi?

Huobi was founded in China and is now based in Singapore, with offices in Hong Kong, South Korea, Japan and the North America, currently sitting #3 in volume on Coinmarketcap. Huobi is a great leap forward for our growing presence in Asia and we are very excited to be listed here!
You can find the official Huobi announcement here.

Groestlcoin Core v2.16.3 - Please Update ASAP

A new major Groestlcoin Core version 2.16.3 is now available for download which includes both a Denial of Service component and a critical inflation vulnerability, so it is recommended to upgrade to it if you are running a full Groestlcoin node or a local Groestlcoin Core wallet.
v2.16.3 is now the official release version of Groestlcoin Core. This is a new major version release with a very important security updates. It is recommended to upgrade to this version as soon as possible. Please stop running versions of Groestlcoin Core affected by CVE-2018-17144 ASAP: These are 2.13.3 and 2.16.0.
As a result in this, all exchanges and services have been asked to upgrade to this version, so please be patient if wallets go in to maintenance mode on these services.

What's new in version v2.16.3?

This is a major release of Groestlcoin Core fixing a Denial of Service component and a critical inflation vulnerability (https://nvd.nist.gov/vuln/detail/CVE-2018-17144) exploitable by miners that has been discovered in Groestlcoin Core version 2.13.3 and 2.16.0. It is recommended to upgrade to 2.16.3 as soon as possible. If you only occasionally run Groestlcoin Core, then it's not necessary to run out and upgrade it right this second. However, you should upgrade it before you next run it. If you know anyone who is running an older version, tell them to upgrade it ASAP. Stored funds are not at risk, and never were at risk. At this time we believe over half of the Groestlcoin hashrate has upgraded to patched nodes. We are unaware of any attempts to exploit this vulnerability. However, it still remains critical that affected users upgrade and apply the latest patches to ensure no possibility of large reorganizations, mining of invalid blocks, or acceptance of invalid transactions occurs.

The Technicals

In Groestlcoin Core 2.13.3, an optimization was added (Bitcoin Core PR #9049) which avoided a costly check during initial pre-relay block validation that multiple inputs within a single transaction did not spend the same input twice which was added in 2012 (Bitcoin Core PR #443). While the UTXO-updating logic has sufficient knowledge to check that such a condition is not violated in 2.13.3 it only did so in a sanity check assertion and not with full error handling (it did, however, fully handle this case twice in prior to 2.1.0.6). Thus, in Groestlcoin Core 2.13.3, any attempts to double-spend a transaction output within a single transaction inside of a block will result in an assertion failure and a crash, as was originally reported. In Groestlcoin Core 2.16.0, as a part of a larger redesign to simplify unspent transaction output tracking and correct a resource exhaustion attack the assertion was changed subtly. Instead of asserting that the output being marked spent was previously unspent, it only asserts that it exists. Thus, in Groestlcoin Core 2.16.0, any attempts to double-spend a transaction output within a single transaction inside of a block where the output being spent was created in the same block, the same assertion failure will occur. However, if the output being double-spent was created in a previous block, an entry will still remain in the CCoin map with the DIRTY flag set and having been marked as spent, resulting in no such assertion. This could allow a miner to inflate the supply of Groestlcoin as they would be then able to claim the value being spent twice.
Groestlcoin would like to publicly thank Reddit user u/Awemany for finding CVE-2018-17144 and reporting it (https://lists.linuxfoundation.org/pipermail/bitcoin-core-dev/2018-Septembe000064.html). You deserve gratitude and appreciation from cryptoworld, and you have ours. If you want to support him for his work, please consider donating to him on his bitcoin cash address: bitcoincash:qr5yuq3q40u7mxwqz6xvamkfj8tg45wyus7fhqzug5
http://i.imgur.com/3YhyNZK.png

Groestlcoin Electrum-GRS 3.2.2 - Ledger & Trezor Edition

What is Electrum-GRS?
Electrum-GRS is a lightweight "thin client" groestlcoin wallet Windows, MacOS and Linux based on a client-server protocol. Its main advantages over the original Groestlcoin client include support for multi-signature wallets and not requiring the download of the entire block chain.

Changes:

http://i.imgur.com/3YhyNZK.png

Electrum-GRS Mobile Android

What is Electrum-GRS Mobile?

Electrum-grs is a lightweight "thin client" groestlcoin wallet Android based on a client-server protocol. Its main advantages over the original Groestlcoin client include support for multi-signature wallets and not requiring the download of the entire block chain.

Changes

Groestlcoin EasyVanity Released

Groestlcoin EasyVanity is a Windows app is built from the ground-up in C# and makes it easier than ever before to create your very own bespoke Groestlcoin address(es), even whilst not connected to the internet! You can even generate multiple keys with the same prefix and leave it on overnight whilst your CPU or GPU collects and stores these addresses locally.
If you're tired of the random, cryptic addresses generated by regular groestlcoin clients, then Groestlcoin EasyVanity is the right choice for you to create a more personalized address.

Features

• Ability to continue finding keys after first one is found • Includes warning on startup if connected to the internet • Ability to output keys to a text file (And shows button to open that directory) • Ability to make your match case sensitive (Where possible) • Show and hide the private key with a simple toggle switch, and copy the private key straight to your clipboard • Show full output of commands • Includes statistics whilst the application is running • Ability to choose between Processor (CPU) and Graphics Card (GPU) • Automatically detects 32 or 64 bit systems • Features both a Light and Dark Material Design inspired Themes • EasyVanity's search is probabilistic, and the amount of time required to find a given pattern depends on how complex the pattern is, the speed of your computer, and whether you get lucky. • EasyVanity includes components to perform address searching on your CPU (vanitygen) and your OpenCL-compatible GPU (oclvanitygen). Both can be built from source, and both are included in the Windows binary package. • Prefixes are exact strings that must appear at the beginning of the address. When searching for prefixes, Easyvanity will ensure that the prefix is possible, and will provide a difficulty estimate. • The percentage displayed just shows how probable it is that a match would be found in the session so far. If it finds your address with 5% on the display, you are extremely lucky. If it finds your address with 92% on the display, you are unlucky. If you stop EasyVanity with 90% on the display, restart it, and it finds your address with 2% on the display, your first session was unlucky, but your second session was lucky. • EasyVanity uses the OpenSSL random number generator. This is the same RNG used by groestlcoin and a good number of HTTPS servers. It is regarded as well-scrutinized. Guessing the private key of an address found by EasyVanity will be no easier than guessing a private key created by groestlcoin itself. • To speed up address generation, EasyVanity uses the RNG to choose a private key, and literally increments the private key in a loop searching for a match. As long as the starting point is not disclosed, if a match is found, the private key will not be any easier to guess than if every private key tested were taken from the RNG. EasyVanity will also reload the private key from the RNG after 10,000,000 unsuccessful searches (100M for oclvanitygen), or when a match is found and multiple patterns are being searched for. • Free software - MIT. Anyone can audit the code. • Written in C# - The code is short, and easy to review.

Groestlcoin Sentinel (Android & Blackberry) – Mainnet + Testnet

What is Sentinel?

Groestlcoin Sentinel is the easiest and fastest way to track/receive/watch payments in your offline Groestlcoin Wallets. Groestlcoin Sentinel is compatible with any standard Groestlcoin address, BIP44 XPUB (Extended Public Key) BIP49 YPUB and BIP84 ZPUB
Groestlcoin Sentinel is a great solution for anyone who wants the convenience and utility of a hot wallet for receiving payments directly into their cold storage (or hardware wallets). Sentinel accepts XPUB's, YPUB'S, ZPUB's and individual Groestlcoin address. Once added you will be able to view balances, view transactions, and (in the case of XPUB's, YPUB's and ZPUB's) deterministically generate addresses for that particular wallet.

What's New?

The P2SH paperwallet supports creating P2SH paperwallets in bulk, keypair generation with QR codes and sweeping tool. Groestlcoin believes strongly in privacy, the live version does not collect and store IP or transaction data.
Changes
Features
The BECH32 paperwallet supports creating BECH32 paperwallets in bulk, keypair generation with QR codes and sweeping tool. Groestlcoin believes strongly in privacy, the live version does not collect and store IP or transaction data.
Features
![WebWallet](https://i.imgur.com/Z2oj7bj.png)

Groestlcoin Web Wallet Update 1.4

What is Groestlcoin Web Wallet?
Groestlcoin Webwallet is an open source, multisignature, HD Wallet and more! Webwallet is a a open source browser based Groestlcoin webwallet.
Webwallet is a playground for Groestlcoin in javascript to experiment with. It supports multisig, OP_HODL, RBF and many more. Groestlcoin believes strongly in privacy, the live version does not collect and store IP or transaction data.
Changes:
submitted by Yokomoko_Saleen to groestlcoin [link] [comments]

Thank you for running your own full Vertcoin node and supporting VTC network! We currently have 500+ Full Nodes running.

Thank you for running your own full Vertcoin node and supporting VTC network! We currently have 500+ Full Nodes running.
Official node scanner list (NOT RELIABLE, current node count could be much much higher. If you are a developer, please help us make a better Node Scanner): https://scanner.vertcoin.org/nodes
Since every full VTC node can only serve so many clients, it's important to do your part for the Vertcoin network and run your own full node.
Q: WHAT IS A FULL NODE? A: Full nodes maintain a copy of the blockchain/ledger, distribute it to those downloading it, confirm transactions, and further spread out all of the previous functions to make the network more resilient. https://bitcoin.org/en/full-node
Q: Do I need to be a miner? A: No, you don't need to be a miner. Miners create new blocks. Full nodes simply share existing blocks (the entire VTC blockchain) with the rest of VTC wallet users.
Q: How do I run a Full VTC node on Intel NUC? A: Intel NUC Vertcoin full node installation done using Windows guide: https://github.com/vertcoin-project/VertDocs/blob/mastedocs/FullNodes/intel-nuc.md
Q: How do I run a Full VTC node? A: It's actually quite easy to do. If you run Vertcoin-QT (Vertcoin Core Wallet) on your PC/MAC desktop, keep it active in the systray. Then, make sure that you map the public port 5889 of your router to the port 5889 on the machine running Vertcoin-QT or vertcoind. For people running a public p2pool node this should be a no-brainer: you already have a synchronized vertcoind. So if you haven't opened port 5889 do it now - it's all you have to do. Your node is then public and can serve blocks and relay transactions.This makes our network much stronger and will help it to perform better. Any old or low power computer is good enough to run a full VTC node. If you have a Raspberry Pi or any old PC lying around, install vertcoind and run it in the background.
Q: How do I know if my Full Node is working correctly? A: To be a full node, you have to check to make sure you are accepting incoming connections. To do that, go under Help -> Debug Window. In the first tab, "Information", there is a Network "Number of Connections" which will show both incoming and outgoing connections. If the "In" is 0, then you are not a full node. If the "In" is greater than 0, you are acting as a full node and supporting VTC blockchain! Thank you!
What is Vertcoin? | Lightning Network SEGWIT Enabled ASIC resistant money https://www.youtube.com/watch?v=86-oMyHDCNc
Linux instructions: https://www.cryptocurrencyfreak.com/2017/09/06/setup-vertcoin-full-node-ubuntu-16-04/
submitted by blockchaintechnology to vertcoin [link] [comments]

Dogecoin Core 1.7.0 released - Check in here for all info you need

Hi shibes!
The Dogecoin developers are proud to announce the final version of Dogecoin Core 1.7! After lots of coding, testing and swearing this is the next version of our reference client. It brings Dogecoin one big step forward on the technical side of things, with moving to the Bitcoin 0.9 codebase.
The full release notes are available here: https://github.com/dogecoin/dogecoin/releases/tag/v1.7.0
TL;DR of the release notes
Is this mandatory? No, you can stay on 1.6 if you want for now. This update adds quite a few new features you'd miss out on.
How to update?
  1. Backup your wallet! This is very important! Go to File -> Backup Wallet, and save this file in at least two safe places for a good backup.
  2. Exit the client you're running now.
  3. Install the update
    1. For Windows, use the setup.exe to update. If you are using the new 64bit version you'll need to uninstall 1.6 afterwards.
    2. For Mac just overwrite the version you currently have in you Applications folder.
    3. For Linux you'd overwrite your current dogecoin-qt binary with the new one.
  4. Start the client. That's it :)
About going back to 1.6 Once you go to 1.7 there is no easy way back to 1.6. That's why it's important to have a backup of your wallet. Just in case. Be aware that a backup goes out of date after 100 transactions! Several people have been running 1.7 for a while now and see no problem with it, so you probably don't want to go back anyway ;)
Downloads (Listing here this time to make it easier to find)
Changes from RC1
Staying up to date If you want to easily stay up to date with releases, you can subscribe to the mailing list right here: http://sourceforge.net/p/dogecoin/mailman/dogecoin-releases/ That's especially advised if you are a service provider!
General comments For anyone running an exchange, please also note that in light of the 51% attack against Reddcoin last night, the Dogecoin developers now recommend a minimum of 10 confirmations for payments into an exchange.
Thanks Thanks to everyone who contributed so far! Especially leofidus-ger, rnicoll and patricklodder, who have done by far the most of the work for this release. But of course thanks to everyone else who contributed, may it be advice or code or whatever. Also thanks to the Bitcoin developers. And of course thanks to the Dogecoin community! You are what makes it fun to work on all this ;)
submitted by langer_hans to dogecoin [link] [comments]

Groestlcoin June Development Update & Release!

Another Quarter, Another Release! The Groestlcoin production factory has been working overtime as always in order to deliver even more tech to push Groestlcoin mainstream when the time comes.
There have been many new fantastic wallets and exchanges added to Groestlcoins repertoire over the past 3 months so we will re-cap these before moving on to what is new today.

Recap

What's New

Re-forged: Groestlcoin Samourai

Groestlcoin Samourai is a wallet for the streets. A modern Groestlcoin wallet hand-forged to keep your transactions private, your identity masked, and your funds secure. Its main advantages are its extreme portability and is the most secure Groestlcoin mobile HD wallet.
We've built a wallet that Groestlcoin deserves. If you are looking for a wallet that Silicon Valley will never build, the regulators will never allow, and the VC's will never invest in, this is the perfect wallet for you.
![Groestlcoin Samourai Release Video](http://img.youtube.com/vi/i3WU8Tde8XQ/0.jpg)

Head over to the Groestlcoin Samourai Release Page here for the full release announcement.

New: GroestlImage

Groestlimage turns any file into a mnemonic phrase allowing users to generate Groestlcoin private keys and addresses based on the data URI of the provided file. A picture is worth a thousand Groestls.

Features:

Link

https://groestlcoin.org/groestlimage/

Source Code

https://github.com/Groestlcoin/groestlimage

New: Groestlcoin Core Config Generator

Groestlcoin Core Config Generator is a simple GUI to configure the groestlcoin.conf file – A developers dream tool!
Each configuration option is available via the user interface, grouped by what attributes they affect. For ease of getting started with a new configuration, a variety of preset "node classes" are available on the right-hand-side of the screen. Selecting a preset will load our recommended base configuration for a node fitting that description, at which point you can then tune the configuration at the single option level.

Features

Link

https://config.groestlcoin.org/

Source Code

https://github.com/Groestlcoin/groestlcoin-core-config-generator

New: Groestlcoin Dumb Block Explorer

Dumb Block Explorer is a trivial block explorer written in a single PHP file. Now everybody can run their own block explorer.

Features

Link

https://www.groestlcoin.org/explore

Source Code

https://github.com/Groestlcoin/dumb-block-explorer

New: Groestlcoin SMS Push TX

Groestlcoin Simple Push TX is a server to push Groestlcoin transactions via SMS. Now everybody can send new transactions via SMS if the Internet is not usable (i.e. blocked by government entities or becomes otherwise unavailable).

Features

Source Code

https://github.com/Groestlcoin/smspushtx

Update: Electrum-GRS 3.3.6

Electrum-GRS is Groestlcoins #1 thin-client for Windows, MacOS, Linux and Android, based on a client-server protocol. Supporting multi-sig wallets without the bloat of downloading the entire blockchain.

New Features (Universal)

New Features (Windows, MacOS, Linux)

New Features (Android)

Link

https://github.com/Groestlcoin/electrum-grs/releases/download
https://play.google.com/store/apps/details?id=org.groestlcoin.electrumgrs

Source Code

https://github.com/Groestlcoin/electrum-grs
submitted by Yokomoko_Saleen to groestlcoin [link] [comments]

Dash: QT Wallet Private Key Export/Import = G15E17 Bitcoin Wallet Recovery Dash: QT Wallet Installation Guide - MAC =G15E02 How to import and export private keys with the Dinero QT Wallet How to make your Bitconnect QT wallet sync on Mac

Bitcoin-Qt is the so – called" official " client of the network, which is developed and promoted by Bitcoin Foundation, a non-profit organization uniting core developers and responsible for the community's contacts with corporations and governments.Bitcoin Foundation branches are opened in several dozens of countries around the world. Electrum ist eine leichtgewichtige Bitcoin-Wallet für Mac, Linux und Windows. Electrum wurde im November 2011 entwickelt. Die Hauptfunktionen von Electrum sind: Support für Hardware-Wallets (wie z.B. TREZOR, Ledger Nano und KeepKey) und eine sichere Bitcoin-Speicherung durch die Nutzung eines Offline-Computers. Electrum ist eine gute Option für Anfänger und erfahrene Benutzer. iOS und ... But how about core qt wallet client. Well, you can install wallet in your new machine and just transfer coins to it. Or you can just copy the wallet backup files and put it in the appropriate folder. But this is not the right solution. Bitcoin blockchain file size is more than 150 GB, Monero wallet size is more than 50 GB and Litecoin wallet is more than 20 GB. With such huge blockchain file ... Bitcoin Core ist ein gemeinschaftliches, freies Software-Projekt, veröffentlicht unter der MIT-Lizenz. Release-Signaturen überprüfen Download über Torrent Quelltext Versionshistorie anzeigen Bitcoin Core Release Signierschlüssel v0.8.6 - 0.9.2.1 v0.9.3 - 0.10.2 v0.11.0+ I had Bitcoin-Qt on my computer with several bitcoins in my wallet, using Vista. Then my computer crashed. Finally I was able to get my computer fixed and download a new version of Bitcoin-Qt. Now I would like to import my original wallet.dat from the old client which was encrypted into an new version of Bitcoin-Qt. How do I do that?

[index] [12459] [32341] [11004] [50584] [15636] [656] [38009] [683] [30856] [46066]

Dash: QT Wallet Private Key Export/Import = G15E17

Dash is built from Bitcoin's core code, meaning that it remains compatible with systems that are already designed to work with Bitcoin. The creator of Dash, Evan Duffield, works with a "core team ... Dash is built from Bitcoin's core code, meaning that it remains compatible with systems that are already designed to work with Bitcoin. The creator of Dash, Evan Duffield, works with a "core team ... How to Setup and Sync Bitconnect-Qt Wallet on macOS - Duration: 4:27. Alex Vinnitsky 3,643 ... How to install Electrum Wallet for Bitcoin (BTC) on a Mac - Duration: 7:42. HowTo forMac 9,871 views ... How to create a paper wallet and import it to your Ravencoin wallet. Support this channel by checking out the links below: 100 free coins for signing up with this ICO: https://goo.gl/jgMp9P Dash: QT Wallet Private Key Export/Import = G15E17 - Duration: 10:44. ... Bitcoin How to import your old wallet into new one tutorial works 100% Recovered 1.7 BTC - Duration: 8:26. XOOMdotWS ...

#